If you’re trying to pair AirPods with your iPhone, the first step is to make sure you’re using Bluetooth on your device. You can check your Bluetooth status in Control Center on your iPhone or iPad. If your device doesn’t have Bluetooth enabled, you’ll need to follow the instructions for your specific device.
Problems
If you’ve recently purchased an Apple AirPods pair, you may be encountering problems connecting them to your device. These problems can be caused by a few different reasons. One common cause is that the battery is running low. To fix this issue, try charging them and turning on the Bluetooth on your iPhone or iPad.
Another possible reason is that your AirPods are not connected to your phone or are too far away. In this case, you may have to reset your AirPods. Resetting the AirPods is easy and quick to do. You will need to remove them from their case and press the setup button on your iPhone or iPad for about 20 seconds. Once this is done, you should see a white or red blinking light.
If your AirPods are not pairing, you might have a problem with your iPhone or Bluetooth. Make sure all the wires and components are attached properly. If you still have issues, you should visit an Apple Service Center to get a new pair. If you have a defective pair of AirPods, you can also take them to an Apple service center and get them repaired.
Fixes
If you’re having trouble connecting AirPods to iPhone, there are a couple of things you can try. First, turn off your iPhone. This will turn off any background applications that might be preventing the headphones from connecting. If that doesn’t work, you can try turning off Bluetooth by closing the charging case lid. After doing this, the headphones should be able to connect.
Next, make sure your iPhone is running iOS 12.2 or higher. Often, updated operating systems are more stable and have better connections. If the problem still persists, you can try the next fix: connect your AirPods to your iPhone. This might require a reboot, but it’s worth a try.
AirPods might be too low in battery. If this is the case, make sure to charge them before connecting them to your iPhone. Another common cause of this problem is stuck programs. Restarting your MacBook will force the AirPods to reconnect to your iPhone. Make sure you sign in to iCloud before starting the procedure.
If these steps don’t work, the problem is most likely permanent. If you’ve tried the previous solutions and your AirPods are still not connecting, you can take them to Apple for repair or exchange. However, this will cost you quite a bit of money. Thankfully, there are several other solutions for connecting your AirPods to iPhone.
Restarting device
If the Bluetooth connection between your iPhone and AirPods keeps faltering, try restarting your iPhone. This simple task will clear out the system’s RAM and get the Bluetooth working properly again. It will also allow you to connect AirPods again. Alternatively, you can use Siri to do it for you.
If the above steps fail to resolve the issue, try resetting your iPhone or iPad. Moreover, make sure to update your device’s software.
If your AirPods are still not pairing, you can try resetting them. To do this, you must open the charging case of your iPhone or iPad and hold it for a few seconds. Once you have done this, the LED on your AirPods will flash. After a few seconds, you should be able to pair them again.
Cleaning AirPods
Apple’s AirPods are truly wireless earbuds. However, since they’re made to be worn every day, they’re susceptible to dust and dirt. This can cause them to look dirty much faster than other wireless earbuds. Luckily, there are a few easy ways to clean them.
The first step is to disconnect the earbuds from the iPhone. This can be done by turning the Bluetooth off and on again. If the problem persists, you may need to try reconnecting your AirPods. You may also need to switch to a different charging brick or Lightning cable.
If you’ve had problems charging your AirPods, it’s likely the charging case is preventing proper contact with the charging pins. Clean the charging case to ensure proper charging. Make sure you use a thin, pointy object, such as a toothpick, to do this. Then, reconnect your AirPods to your iPhone.
You can also reset your AirPods to “as-new” condition. You should first pair your AirPods with your iPhone, and then put them back in the charging case. Look for the Setup button and a flashing LED on the case. Once the LED is flashing, you can open the case, and the AirPods should be connected again.